Full-Motion TV Wall Mount – For 37"-90" TVs up to 135 lbs.

  • Type Full-Motion
  • Fits TVs 37" - 90"
  • Max Weight 135lbs
  • Swivel 90° / -90°
  • Extension 26.00"

SLF226

Hover over the large image to zoom

Full-Motion TV Wall Mount – For 37"-90" TVs up to 135 lbs.

  • Type Full-Motion
  • Fits TVs 37" - 90"
  • Max Weight 135lbs
  • Swivel 90° / -90°
  • Extension 26.00"

SLF226

SLF226 is rated 2.9 out of 5 by 12.
  • y_2018, m_12, d_10, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_slf226, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_sanus
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 39.67ms
  • REVIEWS, PRODUCT

The SANUS Simplicity™ SLF226 full-motion tilt and swivel TV wall mount fits most flat-panel and curved TVs 37” – 90” up to 135 lbs. The dual articulating arms on the SLF226 let you extend, tilt and swivel your TV up to 26” from the wall, so you can always find the perfect viewing angle, giving you optimum picture quality no matter where you’re sitting in a room. Exclusive tilting technology allows effortless tilt motion with just the touch of a finger. Cable management channels secure loose cables along mount arm for a clean look. Post-install level and shift adjustments ensure TV is perfectly positioned. Fits most flat-panel and curved TVs up to 90”. Includes a 5-year limited warranty.

Will this work with my TV?

Enter the model number of your TV to find out.

Here are a few products that are compatible with your TV!

    Ready to install your Mount?

    Use the HeightFinder for mounting instructions. Go to HeightFinder

    Product Features

    1. Allows you to effortlessly turn the screen to any seating position in the room with air glide technology
    2. Provides ultimate stability by firmly holding your TV in the desired position.
    3. Stylish design provides a sleek, simple appearance leaving a minimal amount of space between your TV and the wall.
    4. 2.7" low profile depth to complement thinner TV's.
    5. 26" of extension to provides flexibility for positioning.
    6. Universal TV interface provides maximum compatibility for all TV brands.

    Take A Look At These Specs

    Product Brand: SANUS Simplicity
    Model Code: SLF226
    UPC Code: - Black
    Product Width: 27.60" / 70.10cm
    Product Height: 17.70" / 44.96cm
    Product Depth: 2.70" - 26.00" / 6.86cm - 66.04cm
    TV Size Range: 37" - 90" / 93.98cm - 228.60cm
    Maximum TV Weight: 135lbs / 61.23kg
    Universal Mounting: Yes | 100 x 100 through 600 x 400
    Supported VESA Patterns
    Tilt: / -15°
    Roll: / -
    Swivel: 90° / -90°

    Supported VESA Patterns

    • VESA 100 x 100
    • VESA 200 x 200
    • VESA 300 x 300
    • VESA 400 x 200
    • VESA 400 x 400

    Tools You Will Need For Installation

    • 7/32" Drill Bit
    • 3/8" Masonry Bit (Concrete Installations)
    • 1/2" Socket Wrench
    • Electric Drill
    • Hammer
    • Level
    • Phillips Head Screwdriver
    • Stud Finder
    • Tape Measure
    Rated 3 out of 5 by from Its Ok. Bought this wall mount from costco. Instructions i found were ok to use, but found out quickly that the hardware for attatching to the tv blocks input jacks for RGB on my LG65" which i also purchased at costco. It doesnt block the power input or the hdmi plugins which was a plus. Considering Sanus website mentioned it was compatiable with my TV. I also found that the tension tilt knob to tighten or loosen is not welll built/made. My first purchase with this mount i guessed i overtighted the knob and somehow stripped it and it wouldnt keep the tv at a tilt that i needed. So i had to return the whole mount back to get another thinking it would be better. Not really. Still have to be carefull as to not tighten to much. All in all a very sturdy mount. Strong and designed well to look good.
    Date published: 2018-11-30
    Rated 3 out of 5 by from Good Mount - Install not so good Before attempting installation, I studied all documentation that came in the box as well as information on the website. I even read all of the reviews. The review that I should have paid close attention to was the one that warned you not to rely on the HeightFinder tool on the website. As there is really no other way to determine where to drill holes for my desired TV position I had no choice but to use the tool. My situation was somewhat different than most, I was trying to mount my TV between an existing entertainment center, so my measurements had to be precise. After measuring the distance I wanted the TV from the floor I entered that distance (plus an extra 1/4 inch just in case) into the tool. I drilled my holes exactly as told. Loaded the TV on the mount and it would not clear the top part of the entertainment unit. The measurement was 1 1/2 inches off, which might not seem like much, unless you're trying to fit the TV into a wall unit. So I had to start all over again! What was going to be a 2 hour job turned into much more!! Also, the bracket on the back of my TV was at the max screw holes top and bottom, so I couldn't adjust there. The other issue that I had once I finally got the wall bracket at the right height and the TV back on the mount was leveling. The instruction manual tells you to tighten the set screw on the bracket after hanging the TV, which I did. But you can't turn the leveling screw with the set screw completely tightened, took me a bit to figure that out. Overall I believe the mount is a good one, but the installation could have been much easier with more accurate instructions and a more accurate HeightFinder. I wanted the mount so that I could bring the TV out flush with the wall unit. On the stand it sat a good 6 inches into the unit and you couldn't see part of the TV when not sitting directly in front of it. This did solve that issue.
    Date published: 2018-11-30
    Rated 2 out of 5 by from Horizontal TV bracket blocks power and input jacks I brought this from Costco. When I install I found the Horizontal TV bracket blocks the power and A/V input jacks for my new LG UK6500AUA 4K HDR Smart LED UHD TV. The website said it the TV is compatible with this mount.
    Date published: 2018-11-29
    Rated 1 out of 5 by from blocks input jacks even though the website says that my tv is compatible with this mount, the bracket blocks the input jacks
    Date published: 2018-11-24
    Rated 1 out of 5 by from Difficult set up.... You should include 7/32 bit.. Unnecessarily difficult set up... cheap and unprofessional product, will return...
    Date published: 2018-11-24
    Rated 5 out of 5 by from Full motion convenience for almost any TV! I purchased this full motion TV mount to replace my clunky TV stand in my bedroom. I am so glad I made this purchase as I was able to mount higher off the ground which really opens up the room. The extension arms makes attaching your devices a breeze and then you can angle and tilt to get the perfect angle when lounging. Super smooth adjustments and the thing is built like a tank. Highly recommend!
    Date published: 2018-11-06
    Rated 5 out of 5 by from Great Features and Price and Easy Install Bought this TV Mount at Costco, and I am very pleased with the product, installation, and outcome. Everything I needed was either included or available online (height finder). Installation was pretty straightforward, and there were no surprises. The tight fitting bottom wall-plate screws (to "lock" the mount arm into the wall bracket), though, were a bit tedious to install. They must be installed upward from below, in tight quarters, while holding the arm assembly in position. Finally, the height finder item was great, as my TV ended up almost exactly where the guidance assistance said it would...nice! All together, this SANUS TV mount is well-priced, the instruction booklet is well done and very easy to follow, and the end result of the installation more than met my expectations.
    Date published: 2018-10-01
    Rated 3 out of 5 by from Great mount, height instructions were off I installed this mount today. The mount itself works well. However, the Sanus recommended height for my Samsung 65" Q6 series TV was off by a few inches. The bottom of the TV ended up a few inches below where the website said it would even though the drill holes were at the specified height. I ended up needing to get a shorter table because of it. Bottom line is don't trust the online tool.
    Date published: 2018-09-05
    • y_2018, m_12, d_10, h_1
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_12
    • loc_en_US, sid_slf226, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_sanus
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getReviews, 25.44ms
    • REVIEWS, PRODUCT
    comments powered by Disqus