Full-Motion TV Wall Mount – For 22"-55" TVs up to 60 lbs.

  • Type Full-Motion
  • Fits TVs 22" - 55"
  • Max Weight 60lbs
  • Swivel 90° / -90°
  • Extension 18.00"

SMF218

Hover over the large image to zoom

Full-Motion TV Wall Mount – For 22"-55" TVs up to 60 lbs.

  • Type Full-Motion
  • Fits TVs 22" - 55"
  • Max Weight 60lbs
  • Swivel 90° / -90°
  • Extension 18.00"

SMF218

SMF218 is rated 2.8 out of 5 by 22.
  • y_2019, m_12, d_13, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_en_US, sid_smf218, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_sanus
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 19.64ms
  • REVIEWS, PRODUCT

The SANUS Simplicity™ SMF218 full-motion tilt and swivel wall mount for most 22” – 55” flat-panel and curved TVs up to 60 lbs. Get the best picture quality anywhere in a room with smooth swivel, pan and extend motions up to 18” from the wall. Exclusive tilting technology allows effortless up and down tilt motion without the use of tools. Post-installation adjustments allow you to level your TV after installation for perfect positioning. Cables can be routed along the mounting arm for a clean look. Included extender brackets and universal compatibility allows mount to fit nearly all flat-panel and curved TVs 22” – 55”.

Will this work with my TV?

Enter the model number of your TV to find out.

Here are a few products that are compatible with your TV!

    Ready to install your Mount?

    Use the HeightFinder for mounting instructions. Go to HeightFinder

    Product Features

    1. Allows you to effortlessly turn the screen to any seating position in the room with air glide technology.
    2. Provides ultimate stability by firmly holding your TV in the desired position.
    3. Stylish design provides a sleek, simple appearance leaving a minimal amount of space between your TV and the wall.
    4. 2.4" low profile depth to complement thinner TV's.
    5. 18" of extension to provides flexibility for positioning.
    6. Universal TV interface provides maximum compatibility for all TV brands.

    Take A Look At These Specs

    Product Brand: SANUS Simplicity
    Model Code: SMF218
    UPC Code: 793795532145 - Black
    Product Width: 17.30" / 43.94cm
    Product Height: 17.30" / 43.94cm
    Product Depth: 2.40" - 18.00" / 6.10cm - 45.72cm
    TV Size Range: 22" - 55" / 55.88cm - 139.70cm
    Maximum TV Weight: 60lbs / 27.22kg
    Supported VESA Patterns
    Tilt: / -15°
    Roll: / -
    Swivel: 90° / -90°

    Supported VESA Patterns

    • VESA 75 x 75
    • VESA 100 x 100
    • VESA 200 x 200
    • VESA 200 x 300
    • VESA 300 x 300
    • VESA 400 x 200
    • VESA 400 x 300
    • VESA 400 x 400

    Tools You Will Need For Installation

    • 7/32" Drill Bit
    • 3/8" Masonry Bit (Concrete Installations)
    • 1/2" Socket Wrench
    • Awl
    • Electric Drill
    • Hammer
    • Level
    • Phillips Head Screwdriver
    • Stud Finder
    • Tape Measure
    Rated 1 out of 5 by from Annoyed, by the wrong video. I have the SMF218 with the single stub mount and bracket. The instructions manual (or lack thereof) directed me to www.sanus.com/2688. However the videos talks about how to mount a double stub NOT the single stub. Also it doesn't show me how to mount the brackets to the tv. Horrible.
    Date published: 2019-12-07
    Rated 5 out of 5 by from Works great, easy installation. Not sure why there are so many comments about the instructions. I thought they were very straightforward. (I didn't watch the video others are commenting on though.) Went up easily. Is straight and level. Moves freely and holds in place. Exactly what I was looking for.
    Date published: 2019-12-01
    Rated 1 out of 5 by from Poor Instructions Video was not helpful. Wish I had purchased a different mount. Purchased from Costco.
    Date published: 2019-10-14
    Rated 4 out of 5 by from Decent Wall Mount Just installed a 32” Samsung on this wall mount. Seems to work OK so far. Instructions were OK. Here’s a couple of points for your consideration: The instructions suggest using a 1/8” drill bit to drill 2-3/4” holes for the mounting lag bolts. Unfortunately, most 1/8” drill bits are only 2-1/4” long. When mounting the horizontal bracket to the TV, there’s quite a bit of “play” when using the M4 or M6 screws (because the bracket hole needs to be large enough to accommodate the M8 screws). Perhaps Sanus could supply the smaller washers with a shoulder, instead of flat washers.
    Date published: 2019-08-07
    Rated 4 out of 5 by from Works Great I bought this at Costco today and came across the reviews looking for the ridiculous instructional video (totally different model). I was concerned I would be in the same boat. But I received all the correct hardware. I did have a hiccup with the screws that mount the vertical TV bracket to the horizontal brackets. Looking at the instructions, It shows the vertical bracket centered on the horizontal brackets. But the screws are too short. Fortunately for me, I was only off by one hole, so I set the top of the vertical bracket in the top of the horizontal bracket (which looks like it was designed to do that!) and worked great. Took about 30 minutes to install.
    Date published: 2019-07-08
    Rated 4 out of 5 by from it worked I bought this from Costco and even though I am pretty handy, I was still intimated by hanging my NEW tv and especially in a travel trailer no guts, no glory! I went 0n line to look for instructions but found none for the Sanus - SMF218. Bummer! I read the instructions and went through it one step at a time and lo and behold, I did it. It wasn't that hard. Just need to read the instructions, hard for a man I admit, but they gave clear and complete instructions. Go for it!
    Date published: 2019-07-07
    Rated 1 out of 5 by from Missing the correct screw size Just like a lot of the reviews say, the package is missing a set of 5m screws to attach the plate to the brackets attached to the TV. Spent 30 minutes messing around with this and will be returning ASAP. Why would they continue to keep it on the shelves at Costco when there are missing screws? Disappointed and wasted time trying to figure it out.
    Date published: 2019-06-06
    Rated 1 out of 5 by from Missing Hardware Opened up the box and found I’m missing 3/4 of the hardware that’s supposed to be included. The majority of the screws, bolts, and spacers are not there. Extremely annoyed and disappointed.
    Date published: 2019-06-04
    • y_2019, m_12, d_13, h_2
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_22
    • loc_en_US, sid_smf218, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_sanus
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getReviews, 145.6ms
    • REVIEWS, PRODUCT
    comments powered by Disqus